Bummer, your cart is empty! Shop for Wine Racks
Designed for external-wall installations from 20°F to 110°F. For low profile installations in commercial and residential wine cellars up to 400 cubic feet. Adjustable humidity control and optional liquid measuring bottle probe will ensure your wine collection is stored at the proper conditions at all times.
Just 14 1/8-inches wide and 13 1/4-inches tall, the 2000VSi cooling unit will fit in between studs and/or above door frames. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.
Built for exterior exposure:
- Exterior weather hood to cover the rear of the cooling unit
- Coated condenser coils
- Cold-temperature compressor heater, allows exposure down to 20°F
- Reusable aluminum filter
- Exterior-grade power cord
CellarPro 2000VSx Features:
- Intuitive LED display
- Adjustable humidity control
- Extra large coils for maximum cooling power
- Commercial-grade Electrofin coating protects from leaks and corrosion
- Energy-saver mode, quick-chill mode & auto-defrost cycle
- LED display panel w/ digital thermostat
- Variable-speed fan
- Condensate management system
- Temperature set point range is 47F to 62F when the cooling unit is properly sized.
- Operates with minimal vibrations and less noise than comparable units from competitors.
- Removable steel outer casing
- Low profile for maximum flexibility
- Audible and visual alarms
- 10-ft power cord
- Dual power sources, unit can be plugged into a receptacle from either the front or the rear side of the cooling unit.
- Adjustable mounting brackets
- ETL tested and certified
- Best in-class warranty: 2 yrs (entire system) / 5 yrs (compressor)
Product Specifications
| Width | 14
3
4
|
|---|---|
| Height | 13
3
8
|
| Depth | 27
7
8
|
| Weight | 81 lbs |
| Room Capacity | 400 cubic feet |
| Amps | 4.52 Amps |
| BTUH | 1886 |
| Power/Rating | 115V AC / 60 Hz |
| Warranty | 2 Years (Entire System) / 5 Years (Compressor) |
If you have questions about this product please call us at 800.584.0960 and we’ll be happy to help you.
Extended Warranty
Designed to augment our standard warranty, our extended warranty increases and enhances coverage as follows:
- Increases the warranty period on the entire system from 2 to 5 years from the date of purchase
- Covers the cost of all parts and labor to repair or replace defective parts during the warranty period
- Covers the cost of in-home service during the warranty period (up to 2 hours per incident)
- Covers shipping costs via standard ground service during the warranty period
Please note that terms and conditions apply - click here for more info
WiFi Thermostat – Ecobee4
Use this upgrade to connect to the Ecobee4 Pro thermostat (sold separately) via 24V thermostat wiring, and control your CellarPro cooling unit through the Wi-Fi enabled Ecobee thermostat.
The CellarPro cooling unit includes 10 feet of low voltage 4-lead 18-gauge wiring to connect to the Ecobee4 thermostat. If you’d like more than 10 feet of wire, let us know when you checkout in the “special instructions” field. We charge $0.50 per foot after the first 10 feet.
The Ecobee4 Pro thermostat can be installed inside or outside the cellar. To install outside the cellar, the wireless remote sensor (included) must be activated and placed inside the cellar. Note that a time lag of up to 15 minutes exists when the remote sensor is used, and it cannot record cellar humidity.
WiFi Thermostat – Nest/Honeywell
Use this upgrade to connect to Nest, Honeywell and other networkable thermostats (sold separately) via 24V thermostat wiring, and control your CellarPro cooling unit through the Wi-Fi enabled thermostat.
The CellarPro cooling unit includes 10 feet of low voltage 4-lead 18-gauge wiring to connect to the thermostat. If you’d like more than 10 feet of wire, let us know when you checkout in the “special instructions” field. We charge $0.50 per foot after the first 10 feet.
Unless it includes a removable probe, most thermostats will need to be installed inside the cellar, so that the temperature conditions can be monitored.
Remote Display/Control Unit
Our remote control kit allows the control panel to be installed in a remote location from the cooling unit.
Connected via 10 feet of 18-gauge low voltage wiring, the control panel can be installed anywhere that’s convenient for you, inside or outside the wine cellar. If you’d like more than 10 feet of wire, let us know when you checkout in the "special instructions" field. We charge $0.50 per foot after the first 10 feet.
Perfect for cooling units that will be installed in remote or hard-to-reach locations, this kit allows the cooling unit to be controlled, and the temperature display to be viewed, remotely via the remote control panel.
100W Heater and Thermostat
CellarPro 100W Heating Element and Thermostat. Designed to be paired with our 2000VS cooling unit, our 100W heating element and thermostat will turn on when the thermostat detects cold water in the pan, and will burn off condensate in the pan to reduce or eliminate condensate flow through the drain line.
Please note: This item will work only in 110V environments.
Bottle Probe Sensor
The remote wine bottle probe is strongly recommended when the wine cooling unit will be placed remotely (ie the cold air will be ducted), and/or the cooling unit is not located near the top of the wine cellar.
The 10-foot cord allows the remote probe to be placed almost anywhere inside the wine cellar. The other side of the probe is fitted with a jack that plugs directly into the face of the wine cooling unit.
Cold-Side Ducting Kit (Low RH)
For low-humidity environments. Duct openings are designed to attach to two 6-inch ducts for evaporator intake and exhaust. Custom design allows access to controls and switches on the face of the cooling unit.
The exhaust exits from the top, and the intake returns from the front.
Shown at left: cold side duct kit (left) AND hot side duct kit (right). The hot side duct kit must be purchased separately.
Kit includes: Duct hoods for cold side intake and exhaust, 50 feet (2x25) of 6-inch insulated (R-6) ducting, remote display and bottle probe.
Cold-Side Ducting Kit (High RH)
For high-humidity environments. Duct openings are designed to attach to two 6-inch ducts for evaporator intake and exhaust. Custom design allows access to controls and switches on the face of the cooling unit.
The exhaust exits from the top, and the intake returns from the front.
Shown at left: cold side duct kit (left) AND hot side duct kit (right). The hot side duct kit must be purchased separately.
Kit includes: Insulated duct hoods for cold-side intake and exhaust, 50 feet (2x25) of 6-inch insulated (R-6) ducting, bottle probe and remote control display kit.
If you have questions about this product please call us at 800.584.0960 and we’ll be happy to help you.
Limited Warranty Policy for CellarPro Cooling Systems
1800 QTL / QT / XT / XTS / H (110V Models): For five years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
1800 XT-220V, 1800 XTx-220V, 1800XTS 220V, 1800H 220V: For two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
1800 XTSx, 2000 VSi/VSx, 3200 VSi/VSx, 4200 VSi/VSx, 6200 VSi/VSx, 8200 VSi/VSx (110V Models): For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
2000VS 220V, 3000S 220V / 4000S 220V / 4200VSi 220V / 4200VSx 220V: For one year from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
Split Systems (115V Models) / Air Handlers: For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of original delivery, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. For all split systems, the warranty will not be activated until the Split System Support and Data Service Sheet has been completed and submitted to CellarPro. The warranty period starts from the time of purchase, regardless of the time of activation.
For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.
All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.
The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident, or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.
Questions? You may also contact us directly by calling 1.800.584.0960.
This product has a 30 Day Money Back Guarantee
If at any time you change your mind about your purchase, you can send the products back for a full refund (no restocking fees). If any products you purchased are defective or received shipping damage, we’ll send you a replacement--no hassles, no worries.
Questions about our guarantee?
Contact us now
Product Specifications
| Width | 14
3
4
|
|---|---|
| Height | 13
3
8
|
| Depth | 27
7
8
|
| Weight | 81 lbs |
| Room Capacity | 400 cubic feet |
| Amps | 4.52 Amps |
| BTUH | 1886 |
| Power/Rating | 115V AC / 60 Hz |
| Warranty | 2 Years (Entire System) / 5 Years (Compressor) |
Configuration Scenarios for the CellarPro VS Series
Option A: Wall Mount
Option B: Floor Mount
Option C: Front Ducted
Option D: Rear Ducted (VSi Only)
Option E: Front & Rear Ducted (VSi Only)
*Venting to the exterior may require the addition of compressor heater (temps below 40°F) and fan cycling switch (temps below 20&de°F).
Recently Viewed Products
